How To Install Your Decal

HOW TO INSTALL

Dry install:

1. Clean area where you are going to stick the vinyl
2. Place tape on the top two corners of the decal and alight the decal in place
3. Once satisfied with location tape down one edge of the decal
4. Lift decal and peel off backing
5. Use the taped side like a hinge and squeegee sign from taped edge over

You will need:

• – Masking tape
• – Application squeegee or credit card
• – Clean dust free cloth
• – Measuring tape or ruler

Wet install (only for clean smooth surface like glass or car paint)

1. Clean area where you are going to stick the decal
2. Thoroughly wet the area with the 50/50 mixture
3. Pull backing of the decal and wet the sticky side.
4. Gently align the decal in correct location
5. Once satisfied with the location squeegee the water out from the center out
6. If there is transfer tape on the decal wet the tape and gently remove it.

You will need:

• – Masking tape
• – Application squeegee or credit card
• – Spray bottle with 50/50 isopropanol alcohol and water
• – Clean dust free cloth
• – Measuring tape or ruler